Section Installation Notes:
1. Determine the installation location of the base metal pendant and make a mark clamp fixing screw holes in the wall.
2. Pre-drilled holes on the wall according to Mark. Tip (if mounted on a wooden wall, no expansion of the hose).
3. Hose with expansion into the drilled hole, use a screwdriver to clamp fixed to the wall.
4. With top screws (with base metal pendant on the side) to secure fixed metal pendant on the clip.
5. Fixed wall metal pendant should have sufficient strength and thickness.
Section repair and maintenance:
1 with a soft wet cloth to wipe clean the dirt on the surface of metal pendant, and then a soft, dry cloth to wipe the surface of metal parts can be.
Do not use any, corrosive cleaners or gauze to wipe something metal pendant with abrasive.